LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mini >> 2012 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2419 (General Electrical System - Repair (E88)) >> Control Units, Modules >> 61 35... Notes On ESD Protection (Electro Static Discharge)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

61 35... Notes On ESD Protection (Electro Static Discharge)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required 

NOTE:

Electrical components which are particularly sensitive to electrostatic discharge (electronic control units, sensors, etc.) are marked with the ESD warning symbol.

- Electro

- Static

- Discharge

Statically charged persons can discharge by touching electrical components.

NOTE:

Humans can only detect a discharge starting from a level of approx. 3000 V.

The danger threshold for electrical components already starts from a level of approx. 100 V.

Fig 1: Caution For Do Not Touch Electrical Components
G04727627Courtesy of BMW OF NORTH AMERICA, INC.

Example:

Mechatronic control unit.

Fig 2: Identifying Mechatronic Control Unit
G04727628Courtesy of BMW OF NORTH AMERICA, INC.
Fig 3: Caution For Do Not Touch Pins Or Multi-Pin Connectors
G04727629Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT:

Do not touch pins or multi-pin connectors directly! 

Touch electrical components by their housings only.

IMPORTANT: To prevent electrical components from being damaged or destroyed by electrostatic discharge, it is absolutely essential to comply with the following instructions:
  • When replacing electrical components, leave the replacement components in their original packaging until immediately before they are to be installed
  • If necessary, always return a removed component in its original packaging (always pack the component away immediately)
  • Read and comply with user information on using the associated special tool 12 7 060 

Personal protective equipment: 

Electrically conducting clothing (high wool content, antistatic shoes required).

These can primarily be identified by the logo on the side.

Fig 4: Identifying Electrically Conducting Clothing
G05780043Courtesy of BMW OF NORTH AMERICA, INC.