86 21... Removing roof railing: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Check molded sealing parts for faults and replace if necessary. Pay attention to identification of molded sealing parts and position accordingly.

Check butylene tape seal.

Use new screws. Coat all screws with OKS 90 thread locking adhesive.

First screw down railing adapter in middle. Then press roof railing downwards with a force of approx. 50 N. Then screw down railing adapter at front and rear.

Tightening Torque for roof railing at front and rear,

refer to 86 21 1AZ, see 86 21 HOOD .

Tightening Torque for roof railing in middle,

refer to 86 21 2AZ, see 86 21 HOOD .