April 5, 2026: LEMON Manuals is launched! Read the announcement.

8610... Replacing 12 volt socket: Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Position all seals correctly. Also secure plug with grommet (2) using new cable tie to other socket.

Fig 1: Removing Cable Tie

G04766414

Courtesy of BMW OF NORTH AMERICA, INC.

On upper side of platform, release Phillips screws (1) on mounting bracket (2).

Fig 2: Identifying Mounting Bracket With Screws

G04766415

Courtesy of BMW OF NORTH AMERICA, INC.

Remove sealing compound along white marking (1).

Make sure cable is correctly laid.

Use Sikaflex 221 as sealing compound.

Fig 1: Identifying White Marking Sealing Compound

G04766416

Courtesy of BMW OF NORTH AMERICA, INC.

Grip under mounting bracket (1) with a screwdriver and lever out bracket (1) towards top. Remove bracket (1).

Fig 2: Identifying Mounting Bracket

G04766417

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1). Remove socket (2) from mounting bracket (3).

Fig 3: Identifying Mounting Bracket With Socket And Nut

G04766418

Courtesy of BMW OF NORTH AMERICA, INC.