High-Pressure Test
WARNING: This page does not describe the selected car, but rather 92 other vehicles, including the 2002 BMW Z3, 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW Z3, and 2001 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform test on both brake circuits, front and rear.
- Unscrew vent plug, connect pressure tester and vent. See Figure.
- Load brake pedal with a force of approximately 112 lbs. (500 N), and block pedal with pedal support.
- After 2 minutes, pressure must not drop by more than 8%.
- Perform low-pressure test.