31 00... Notes on threaded chassis M3 CTR
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
The BMW M3 CTR features a threaded chassis with the following range of adjustments:
- Vehicle height
- Camber on front axle
- Rebound/compression stage, shock absorber
This can be used to adjust the chassis to different road profiles and driving styles.
The chassis has two preset setups:
- Road setup = factory setting for operation in traffic
- Racetrack setup = setting for operation on a racetrack only
IMPORTANT:
For operation in traffic, the factory settings (road setup) must be used!
Note the following procedures for setting the various setups:
Recommended adjustment values (Road Setup) :
| Rebound stage | Compression stage | Ride level | |
|---|---|---|---|
| Front Axle | 6 clicks open | 9 clicks open | 613 |
| Rear axle | 14 clicks open | 6 x 1/4 rotation open | 597 |
Recommended adjustment values (Racetrack Setup) :
| Rebound stage | Compression stage | Ride level | |
|---|---|---|---|
| Front Axle | 4 clicks open | 8 clicks open | 613 |
| Rear axle | 12 clicks open | 5 x 1/4 rotation open | 597 |