LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mini >> 2012 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3417 (General Electrical System - Repair) >> Control Units, Modules >> 61 35... Notes on ESD protection (Electro Static Discharge)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

61 35... Notes on ESD protection (Electro Static Discharge)

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

NOTE: Electrical components which are particularly sensitive to electrostatic discharge (electronic control units, sensors, etc.) are marked with the ESD warning symbol.
-Electro
-Static
-Discharge

Statically charged persons can discharge themselves when they touch electrical components.

NOTE: Humans can only detect a discharge starting from a level of approx. 3000 V.

The danger threshold for electrical components already starts from a level of approx. 100 V.

Fig 1: Discharging Charged Person By Touching Electrical Components
G04727627Courtesy of BMW OF NORTH AMERICA, INC.

Example:

Mechatronic control unit.

Fig 2: Identifying Mechatronic Control Unit
G04727628Courtesy of BMW OF NORTH AMERICA, INC.
Fig 3: Caution For Touching Pins And Multi-Pin Connectors Directly
G04727629Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: Do not touch pins and multi-pin connectors directly! 
Touch electrical components by their housings only.
IMPORTANT: To avoid damaging or destroying electrical components as a result of electrostatic discharge, it is absolutely essential to observe the following instructions:
  • When replacing electrical components, leave the replacement components in their original packaging until immediately before they are to be installed
  • If necessary, always return a removed component in its original packaging (always pack the component away immediately)
  • Read and comply with user information on using the associated special tool 12 7 060

Personal protective equipment: 

Electrically conducting clothing (high wool content, antistatic shoes required).

These can primarily be identified by the logo on the side.

Fig 4: Identifying Antistatic Shoes
G05780043Courtesy of BMW OF NORTH AMERICA, INC.