Service Function: Transport Mode/Pre-delivery check

In order to ensure that a vehicle can be handed over to the customer in proper condition, the "Transport mode/pre-delivery check" service function must be performed.

The following positions are checked during the pre-delivery check:

• Deactivation of the transport mode.
• To determine the vehicle-specific vehicle performance per week an adaptation process is activated. Transport and immobilization periods before vehicle delivery to the customer therefore do not have any effect on the customer-specific weekly distance travelled.

  The weekly mileage/kilometrage is used to control escalation from "green" to "yellow" (approx. 4 weeks before "red") for maintenance scopes with remaining distances. It is the vehicle performance determined over the last 6 weeks which is taken into account.

• Encoding or deletion of the legally-specified intervals for the legally stipulated vehicle inspection and exhaust-gas test.
• Inputting the target dates for the legally stipulated vehicle inspection and exhaust-gas test (automatically or manually).

  Automatically: by date entry of the first registration and the interval

  Manually: by directly entering the target date

• Entry of local, service-related phone numbers, depending on vehicle equipment specification (e.g. BMW Group Mobile Service, BMW Hotline, customer's local dealer).

  The country-specific phone numbers are displayed in the BMW diagnosis system as a note. When asked for input information the phone numbers can simply be read off.

• Information on initializing the TeleServices depending on the vehicle equipment.
• Checking and where necessary adjusting the on-board date for the vehicle.
• Entry of the date of the first registration of the vehicle.
• Clear diagnostic fault entries from fault memory.