31 00... Notes on repairing threads

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2016 BMW 435i xDrive, 2016 BMW 435i, 2016 BMW 428i xDrive, 2016 BMW 428i, and 2015 BMW 435i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Install Heli-coil thread inserts so that they are flush with the original thread.

NOTE: Damaged threads on the engine support may be repaired with Heli-coil thread inserts. Follow the procedure described in the example.

Fig 1: Identifying Damaged Heli-coil Thread

Courtesy of BMW OF NORTH AMERICA, INC.

Procedure:

Create a clean core hole; if necessary, drill out screw remnants

Fig 2: Drilling Core Hole
Courtesy of BMW OF NORTH AMERICA, INC.
Create locating thread for Heli-coil thread insert

Fig 3: Identifying Heli-coil Thread Insert Thread
Courtesy of BMW OF NORTH AMERICA, INC.
Pick out Heli-coil thread insert in accordance with the TABLE and screw into the locating thread until flush with the original thread

Fig 4: Inserting Heli-coil Thread Into Locating Thread
Courtesy of BMW OF NORTH AMERICA, INC.
Break drive pin and remove

Fig 5: Identifying Drive Pin
Courtesy of BMW OF NORTH AMERICA, INC.