General notes

WARNING: This page does not describe the selected car, but rather 45 other vehicles, including the 2016 BMW M5, 2016 BMW 550i xDrive, 2016 BMW 550i, 2016 BMW 535i xDrive, and 2016 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Allow the engine to cool down!

Never start repair work on the fuel system without allowing the engine to cool down first. The coolant temperature must not exceed 40 °C. Compliance with this instruction is absolutely vital, as otherwise residual pressure within the high-pressure fuel system could result in uncontrolled fuel spray.

NOTE: Cleanliness during repair operations!

Special attention should always be devoted to maintaining clean conditions and to carefully following the repair instructions during all repair work. Even minute contamination and minor damage to the threaded connections on the high-pressure lines can result in leaks. Remove the ignition coils before installing the solenoid-controlled fuel injectors.

NOTE: Protect ignition coils against contamination!

When carrying out repair work on the N55 always ensure that the ignition coils are not contaminated by fuel. Contact with fuel substantially reduces the ability of silicone to provide effective sealing. The result would be arcing between the spark plugs and the cylinder head, leading to ignition miss. Prior to working on the fuel system always remove the spark plugs and seal off the spark plug wells with shop towels to protect them from fuel.

We can assume no liability for printing errors or inaccuracies in this document and reserve the right to introduce technical modifications at any time.