Oscilloscope Pattern
WARNING: This page does not describe the selected car, but rather 35 other vehicles, including the 2003 BMW Z8, 2003 BMW Z4, 2003 BMW X5, 2003 BMW M5, and 2003 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Evaluate ignition voltage peaks in response to sudden accelerator loads. Voltage peak No. 1 indicates dying-out process is not much higher than ignition voltage peak. Ignition system is okay. If beginning of dying-out process is considerably higher than ignition voltage peak as is shown in voltage peak No. 2, there is a fault in injection system such as lean mixture, defective injection valve or low compression. See Fig 1.