00 00... Engine oil service
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW Z4, 2007 BMW Z4, 2006 BMW Z4, 2005 BMW Z4, and 2004 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
Carry out oil service at normal operating temperature.
First replace oil filter, then change oil.
Clean sealing surfaces.
Add engine oil in accordance with inspection sheet.
Run engine at idle until oil level and oil pressure warning lamps go out.
Check oil filter housing and oil drain plug for leaks.
Switch off engine, check oil level, correct if necessary (car must be on a horizontal level surface).
Remove any oil traces.
Fill out oil documentation.