61 13 ... Crimping Micro QUADLOCK System Contacts (MQS)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW M3, 2005 BMW M3, 2004 BMW M3, 2003 BMW M3, and 2002 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 61 4 320
For further information on special tools, refer to GENERAL ELECTRICAL SYSTEM - SPECIAL TOOLS - 3-Series (M54/E46) .
To crimp MQS contacts, use pliers 61 4 321 (1) in conjunction with crimping head 61 4 324 (2) from crimping set 61 4 320.
NOTE:
Pliers (1) open automatically as far as they will go when handles are pressed together.
Open pliers (1).
Fold up contact carrier (2).
Insert MQS contact (3) in contact carrier (2).
Fold back contact carrier (2).
NOTE:
Follow procedure for cutting and stripping insulation from cables.
Close pliers (1) one notch.
Insert stripped cable (2).
Close pliers (1) fully.
Open pliers (1).
Open contact carrier (2) gently and carefully remove MQS contact.
NOTE:
Check contact for correct crimping.