Status messages

The following status messages can appear in the list on the display of the IMIB:

• TESTING  = Test is active
• PAUSING  = Cooling-down period within the IMIB
• CONNECTING  = Negotiation between the two subscribers (IMIB and vehicle) while connecting
• ABORTED  = Aborted by user
• COMPLETED  = Test completed
• IDLE  = Idle state
• FAILED  = Test was unsuccessful
• VBUSNOTPRESENT  = Attempt to make a data connection without USB voltage (e.g. cable not connected)
• VOLTAGETOOLOW  = USB voltage less than 4.75V
• UNKNOWN  = Unknown error

This information must be included in the diagnosis depending on requirements.