86 21 ... Replacing Inside Light Power Cable
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Remove inside light cover and lamp housing,
refer to 86 21 ... REPLACING INSIDE LIGHT .
Remove inside light plug,
refer to 86 21 ... REMOVING INSIDE LIGHT PLUG .
refer to 86 21 ... REPLACING INSIDE LIGHT .
Remove inside light plug,
refer to 86 21 ... REMOVING INSIDE LIGHT PLUG .
Carefully remove adhesive bonds of power cable (1) from hood surface.
Installation:
Carefully remove traces of old adhesive with a scraper.
Use standard heat gun adhesive as adhesive.
Carefully remove adhesive bonds of power cable (1) from hood surface.
Installation:
Carefully remove traces of old adhesive with a scraper.
Use standard heat gun adhesive as adhesive.
Remove flat connectors (1). Strip cable ends (2) and connect to a new cable. Feed cable connection through opening (3).
Lay new power cable with old power cable through duct (1).