62 30... Test image of Head-Up Display (HUD)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
Call up the test image as follows:
- Switch the ignition on.
- Switch on the HUD using button (1).
- Press the button (1) for longer than 10 s. A menu selection appears in the HUD
- Use a short keystroke (1) to change between the menus/submenus.
- Use a long keystroke (1) to open and close the submenus on the right.
- Select the {"01 Identification"} (2) menu. Open the right submenu (long keystroke) and display the vehicle identification number (3) (short keystroke).
- Take the cross sum of the vehicle identification number (3) and note it down. (Here, for example, 9 + 3 + 0 + 2 + 9 = 23.)
- Leave the submenu (long keystroke).
- Select {"19 Entriegelung"} menu (4) (short keystroke).
- In the {"Code:"} submenu (6), enter the cross sum (short keystroke). The {"LOCK:"} submenu (5) must be set to "ON".
- Leave the submenu (long keystroke).
- Select {"16 Bitmaps"} menu (7) (short keystroke).
- Activate the test image (long keystroke)
- Display the test images one after the other (short keystroke)
- After making the setting, switch off the ignition.
IMPORTANT:
Switch on the test image for at most 1/2 h. When operating the test image for a lengthy period, switch the blower to interval stage 3 to avoid overheating.