Steering Angle Sensor Adjustment
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW Z4, 2007 BMW Z4, 2006 BMW Z4, 2005 BMW Z4, and 2004 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
In vehicles with active front steering, steering angle sensor adjustment is integrated in the BMW scan tool service function INITIAL OPERATION/ADJUSTMENT FOR ACTIVE FRONT STEERING and must not be carried out separately.
Note: Steering angle sensor adjustment must be carried out:
- After adjustment work on the front axle/steering
- After all mechanical work on the steering system
- After the following components have been replaced/coded:
- Steering column switch cluster.
- DSC control unit.
- ARS control unit.
Connect vehicle to BMW diagnosis system. Select and carry out steering angle sensor adjustment under SERVICE FUNCTIONS.