13 62 660 Replacing Left Or Right Ionic Current Control Unit (S85)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2009 BMW M6, 2009 BMW M5, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Read out fault memory of DME control unit; if necessary, work through test schedules
Switch off ignition
Remove left intake filter housing , RIGHT INTAKE FILTER HOUSING) .

NOTE: Illustration shows and description refers to the left ionic current control unit. The procedure is identical for the right ionic current control unit.

Unfasten screws.

Remove cover (1).

Fig 1: Locating Screws And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release plug connector (1) and pull off.

Unfasten screws.

Remove ionic current control unit (2).

Fig 2: Identifying Plug Connector And Ionic Current Control Unit

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Now clear the fault memory.