Torque Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW Z4, 2007 BMW Z4, 2006 BMW Z4, 2005 BMW Z4, and 2004 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Axle Shaft Collar Nut (Bearing Unit) | 213 (290) | |||
| Axle Shaft-To-Differential & Drive Flange | ||||
| 8 mm Black With Ribbed Teeth | 47 (64) | |||
| 8 mm Silver With Ribbed Teeth | 38 (52) | |||
| 10 mm Fillister Or Torx Head | 61 (83) | |||
| 10 mm With Locking Teeth | 71 (96) | |||
| 10 mm Black With Ribbed Teeth | 74 (100) | |||
| 10 mm Silver With Ribbed Teeth | 59 (80) | |||
| 12 mm With Locking Teeth | 81 (110) | |||
| 12 mm With Ribbed Teeth | 100 (135) | |||
| Bracket Stabilizer Link-To-Upper Control Arm | 16 (22) | |||
| Reinforcing Plate/Tension Strut-To-Rear Axle | (1) 44 (59) |
|||
| Reinforcing Plate-To-Rear Axle | 15 (21) | |||
| Retaining Bracket, Stabilizer Bar-To-Rear Axle Support | 16 (22) | |||
| Tension Strut-To-Rear Axle | 18 (24) | |||
| Wheel Lug Nut | 81-96 (110-130) | |||
|
||||