Torque Specifications
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2007 BMW 550i, 2007 BMW 530i, 2007 BMW 525i, 2006 BMW 550i, and 2006 BMW 530i. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Bracket For Stabilizer Link On Swivel Bearing | 44 (59) | |||
| Connecting Nuts, Hydraulic Lines | ||||
| Pressure | 22 (30) | |||
| Return | 26 (35) | |||
| Control Arm-To-Front Axle Support (1) | ||||
| Step 1 | 74 (100) | |||
| Step 2 | Additional 75-105 Degrees | |||
| Control Arm-To-Steering Knuckle/Swivel Bearing | 122 (165) | |||
| Control Lines-To-Oscillating Motor | 22 (30) | |||
| Engine Mount-To-Engine Support Arm | 41 (56) | |||
| Front Axle Carrier-To-Engine Carrier | 74 (100) | |||
| Hydraulic Line Connections-To-Vane Pump, Power Steering Pump & Steering Gear/Banjo Bolts | ||||
| M14 | 24 (33) | |||
| M18 | 29 (39) | |||
| Reinforcement Plate-To-Front Axle Support/Engine Carrier (1) | ||||
| Step 1 | 41 (56) | |||
| Step 2 | Additional 90-105 Degrees | |||
| Retaining Bar For Stabilizer-To-Front Axle Carrier/Body | 21 (28) | |||
| Shock Absorber Piston Rod On Thrust Bearing | 47 (64) | |||
| Spring Strut Mount To Wheel Arch | 25 (34) | |||
| Spring Strut Shock Absorber-To-Pivot Mount | 60 (81) | |||
| Stabilizer Link-To-Stabilizer/Bracket | 48 (65) | |||
| Tension Strut On Steering Knuckle/Swivel Bearing | 122 (165) | |||
| Tension Strut-To-Front Axle Support (1) | ||||
| Step 1 | 74 (100) | |||
| Step 2 | Additional 75-105 Degrees | |||
| Tie Rod Clamping Nut | 38 (51) | |||
| Tie Rod End Nut | 122 (165) | |||
| Universal Joint/Coupling-To-Steering Gear/Steering Spindle (1) | 16 (22) | |||
| Wheel Bearing Unit On Swivel Bearing | 81 (110) | |||
| Wheel Lug Bolts | 81-96 (110-130) | |||
| INCH Lbs. | ||||
| Pipe Holder | 71 (8) | |||
| Protective Plate-To-Steering Knuckle | 106 (12) | |||
|
||||