86 10 ... Disassembly of Loading Ramp Frame/Disassembly Of Rail, Left/Right
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Two persons are required to disassemble the loading ramp frame.
Disassembly of license plate mounting plate
refer to 86 10 ... DISASSEMBLY OF LICENSE PLATE mounting plate.
Disassembly of pull rod
refer to 86 10 ... DISASSEMBLY OF OVERRUNNING EQUIPMENT .
Disassembly of license plate mounting plate
refer to 86 10 ... DISASSEMBLY OF LICENSE PLATE mounting plate.
Disassembly of pull rod
refer to 86 10 ... DISASSEMBLY OF OVERRUNNING EQUIPMENT .
Release screws (1) of loading ramp frame (2) on cross-strut (3).
Installation:
Tightening Torque, refer to 86 10 PLATFORM .
Release screws (1, 2) on left and right sides of loading ramp frame (3).
Installation:
Use new self-locking nuts.
Tightening Torque, refer to 86 10 PLATFORM .
Release screws (1, 2, 3).
Installation:
Use new self-locking nuts.
Tightening Torque, refer to 86 10 PLATFORM .