86 10 ... Removing Entry Profile Section On Loading Ramp, Left, Right And Center

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Before drilling out rivets, drive in rivet pins with a punch.

Drill out rivets (1). Remove entry profile section (2) towards front.

Fig 1: Identifying Rivets And Entry Profile Section

Courtesy of BMW OF NORTH AMERICA, INC.