32 00... Moving Vehicle Into Normal Position
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Check compliance with test conditions , bring vehicle to a stop if necessary. See 32 00... TEST CONDITIONS FOR CHASSIS/WHEEL ALIGNMENT CHECK .
- Version with air spring system: Carry out ride-height-calibration . See 37 12 012 CARRY OUT RIDE-HEIGHT-CALIBRATION .
- Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary
- Introduce DIN load (refer to TECHNICAL DATA ) into vehicle
- Determine vehicle ride height
. See 31 33 095 MEASURING RIDE-LEVEL HEIGHT OF VEHICLE
.NOTE: If the vehicle ride height is not inside the tolerance (refer to TECHNICAL DATA ), the vehicle must be repaired (coil spring/leakage).