86 21... Replacing inside light power cable
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2013 BMW 135i, 2013 BMW 128i, 2012 BMW 135i, 2012 BMW 128i, and 2011 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Remove inside light cover and lamp housing,
refer to 86 21... REPLACING INSIDE LIGHT .
Remove inside light plug,
refer to 86 21... REMOVING INSIDE LIGHT PLUG .
refer to 86 21... REPLACING INSIDE LIGHT .
Remove inside light plug,
refer to 86 21... REMOVING INSIDE LIGHT PLUG .
Carefully remove adhesive bonds of power cable (1) from hood surface.
Installation:
Carefully remove traces of old adhesive with a scraper. Use standard heat gun adhesive as adhesive.
Carefully remove adhesive bonds of power cable (1) from hood surface.
Installation:
Carefully remove traces of old adhesive with a scraper. Use standard heat gun adhesive as adhesive.
Remove flat connectors (1). Strip cable ends (2) and connect to a new cable. Feed cable connection through opening (3).
Lay new power cable with old power cable through duct (1).