86 10... Disassembly of rear apron
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2013 BMW 135i, 2013 BMW 128i, 2012 BMW 135i, 2012 BMW 128i, and 2011 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Remove rear light,
refer to 86 10... REPLACING REAR LIGHT .
Remove plastic bush/metal bush
refer to 86 10... REMOVING PLASTIC BUSH/METAL BUSH .
refer to 86 10... REPLACING REAR LIGHT .
Remove plastic bush/metal bush
refer to 86 10... REMOVING PLASTIC BUSH/METAL BUSH .
Cut through sealing compound (1) on left and right and remove.
Drill out rivets (2) on left and right sides on lower apron edge.
Installation:
Use Sikaflex 221 as sealing compound.
Cut through sealing compound (1) and remove.
Drill out rivets (2).
Installation:
Use Sikaflex 221 as sealing compound.