86 10... Removing mounting bracket sealing cap

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2013 BMW 135i, 2013 BMW 128i, 2012 BMW 135i, 2012 BMW 128i, and 2011 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Cut out mounting bracket (3) along markings (1, 2) and lever out of apron (4).

Installation:

For gluing, use two-component adhesive ICEMA R 101 and hardener 7.

Mixture ratio: ICEMA R 101 7 parts; hardener 7 1 part.

Fig 1: Identifying Mounting Bracket And Apron

Courtesy of BMW OF NORTH AMERICA, INC.