April 5, 2026: LEMON Manuals is launched! Read the announcement.

86 10... Replacing 12 volt socket

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2013 BMW 135i, 2013 BMW 128i, 2012 BMW 135i, 2012 BMW 128i, and 2011 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

From underside of platform, cut through cable tie (1) and remove. Disconnect plug with grommet (2) from socket (3) towards bottom.

Installation:

Position all seals correctly. Also secure plug with grommet (2) using new cable tie to other socket.

Fig 1: Removing Cable Tie

G05780544

Courtesy of BMW OF NORTH AMERICA, INC.

On upper side of platform, release Phillips screws (1) on mounting bracket (2).

Fig 2: Identifying Phillips Screws On Mounting Bracket

G05780545

Courtesy of BMW OF NORTH AMERICA, INC.

Remove sealing compound along white marking (1).

Installation:

Make sure cable is correctly laid.

Use Sikaflex 221 as sealing compound.

Fig 3: Identifying Sealing Compound With White Marking

G05780546

Courtesy of BMW OF NORTH AMERICA, INC.

Grip under mounting bracket (1) with a screwdriver and lever out bracket (1) towards top. Remove bracket (1).

Fig 4: Removing Mounting Bracket

G05780547

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1). Remove socket (2) from mounting bracket (3).

Fig 5: Identifying Socket And Mounting Bracket

G05780548

Courtesy of BMW OF NORTH AMERICA, INC.