86 10... Replacing holder for chock

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2013 BMW 135i, 2013 BMW 128i, 2012 BMW 135i, 2012 BMW 128i, and 2011 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Pull bar (1) down in direction of arrow A. Pull out chock (2) in direction of arrow B at an angle towards bottom.

Fig 1: Pulling Out Chock

Courtesy of BMW OF NORTH AMERICA, INC.

Release and unscrew cheese head tapping screws (1) on holder (2).

Fig 2: Identifying Cheese Head Tapping Screws On Holder

Courtesy of BMW OF NORTH AMERICA, INC.