86 10... Replacing lashing plate and lashing eye

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2013 BMW 135i, 2013 BMW 128i, 2012 BMW 135i, 2012 BMW 128i, and 2011 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Releasing lashing eye

Pull spring bar (1) upwards in direction of arrow A. Slide lashing eye (3) in direction of arrow B and remove from lashing plate (2).

Fig 1: Removing Lashing Eye

Courtesy of BMW OF NORTH AMERICA, INC.

Release countersunk head screws (1) and remove lashing plate.

Installation:

Tightening torque,

refer to 86 10 3AZ, see 86 10 PLATFORM

Fig 2: Identifying Lashing Plate Countersunk Head Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Locking lashing eye

Position lashing eye (1) on circular openings on lashing plate (2). Press lashing eye (1) in direction of arrow A into lashing plate (2). In this position, slide lashing eye (1) in direction of arrow B. Spring bar (3) snaps in, anchors and secures lashing eye (1) in lashing plate (2).

Fig 3: Pressing Lashing Eye Into Lashing Plate

Courtesy of BMW OF NORTH AMERICA, INC.