Service function: Reset CBS Condition Based Service
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
A maintenance scope can be reset with the "Reset CBS Condition Based Service" service function. Even when availability is over 80 %.
The benefit of reset via the BMW diagnosis system is that the on-board date is corrected automatically.
The individual maintenance scopes are displayed in the BMW diagnosis system with service counter and availability.
- The service counter is reset by one counter on resetting. All service counters are set to "1" on new vehicles.
The service counters are used in the Service Acceptance/Reception Module (SAM) on a scope-specific basis for controlling additional work.
- Availability is set to 100 % on resetting. Availability in % is the wear value of the maintenance scope.
The greater the availability, the longer it is to the next maintenance scope.
0 % means that the maintenance measure must be carried out.