61 13... Removing and installing/replacing fibreoptic cable connector
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Comply with notes and instructions on handling optical waveguides
.
Necessary preliminary tasks:
Remove trim on C-pillar at bottom left .
Slacken nut (2).
Feed fibre optic cable (1) out of holder (3).
Unlock catch on fibre-optic cable connector (4) with a suitable tool (5).
Remove fibre-optic cable connector (4) in direction of arrow from bracket (3).
Carefully raise cover cap (1) with a suitable tool and remove from fibre-optic cable connector (2).
Carefully raise lock (1) and pull fibre-optic cable (2) out of fibreoptic cable connector (3).
Installation:
Make sure fibre-optic cable (2) is correctly seated and engaged in fibre-optic cable connector (3).