67 31... Notes on initializing electric seat servodrives

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Initialization is carried out at the adjusting switch of the relevant seat.

In this process, the end positions of the relevant electric seat servodrive are recorded and stored.

An initialization must be performed:

After replacing a drive unit for seat adjustment.
After replacing/programming control unit for seat adjustment.

Operating sequence for initialization:

Move corresponding seat servodrive(s) into both end positions.