8610... Disassembly of base plate: Notes

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Disassembly of bar
REFER TO 86 10... REPLACING BAR
Disassembly of lashing plate
REFER TO 86 10... REPLACING LASHING PLATE AND LASHING EYE
Disassembly of 12 volt socket REFER TO 86 10... REPLACING 12 VOLT SOCKET
Remove plastic bush/metal bush
REFER TO 86 10... REMOVING PLASTIC BUSH/METAL BUSH
Disassembly of light guard
REFER TO 86 10... REPLACING REAR LIGHT
Disassembly of front apron
REFER TO 86 10... DISASSEMBLY OF FRONT APRON
Disassembly of left and right aprons
REFER TO 86 10... DISASSEMBLY OF LEFT AND RIGHT APRONS
Disassembly of left and right wheel boxes
REFER TO 86 10... DISASSEMBLY OF LEFT AND RIGHT WHEEL BOXES
Disassembly of rear apron
REFER TO 86 10... DISASSEMBLY OF REAR APRON
Disassembly of left and right lamp housings
REFER TO 86 10... DISASSEMBLY OF LEFT AND RIGHT LAMP HOUSINGS
Disassembly of rivet connection, rear support
REFER TO 86 10... DISASSEMBLY PROCEDURE OF RIVET CONNECTION, REAR SUPPORT

Unscrew bolts (1).

CAUTION: Before drilling out rivet heads, drive in rivet pins with a punch.
Drill out rivet connections (2).