61 00... Diagnosis for Condition Based Service: Notes
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Red symbol for pre-delivery check
The vehicle is coded at the end of line so that the red symbol for the pre-delivery check is shown in the Next Service indicator (same symbol as vehicle check).
The symbol is a reminder to the Service staff that the pre-delivery check has not yet been carried out on this vehicle.
NOTE:
Do not carry out a reset.
Do not confuse this function with the "Vehicle check" scope of maintenance work. Do not perform a reset via the instrument panel.
When performing the pre-delivery check with the service function "Transport mode/pre-delivery check": The symbol is suppressed automatically after carrying out the service function.
4 service functions are available in the BMW diagnosis system for maintenance:
- Transport mode/pre-delivery check
- CBS correction, tester data
- Reset CBS
- CBS vehicle data correction