Performing initialization

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Move side window to upper end position
Pull and hold switch in "Close one-touch function" (2nd switch position) during the entire process.

NOTE: Re-initialization was successful if toll function and anti-trap mechanism function flawlessly.

Alternatively, initialization of the power window regulation can also be carried out via the Service function in ISTA.

Selection via:

Body
- Locking and security functions
  - Power window regulator
    - Initialize power window regulators