61 00... Diagnosis for Condition Based Service: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Red symbol for pre-delivery check
The vehicle is coded at the end of line so that the red symbol for the pre-delivery check is shown in the Next Service indicator (same symbol as vehicle check).
The symbol is a reminder to the Service staff that the pre-delivery check has not yet been carried out on this vehicle.
NOTE:
Do not carry out a reset.
Do not confuse this function with the "Vehicle check" scope of maintenance work. Do not run a reset with the KOMBI.
When executing the pre-delivery check with the "Transport mode/Pre-delivery check" service function: The symbol will be suppressed automatically after the service function has been executed.
4 service functions are available in the BMW diagnosis system for maintenance:
- Transport mode/pre-delivery check
- CBS correction, tester data
- Reset CBS
- CBS vehicle data correction