99 00... Touching up paintwork damage

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

These notes apply to paintwork damage on the body aperture that occurred when detaching bonded window glass.

To ensure long-term corrosion protection, it is absolutely essential to touch up damage to paintwork!

The "BMW Color System" painting handbook forms the basis of these repair instructions and must be observed without fail.

Ground down damage to paintwork on body aperture and touch up with BMW multibase filler.

Grind larger areas or damage down to the bare sheet metal and coat with BMW multibase filler (layer thickness 30 to 40 μm).

Hardening time:

With infrared, at least 10 minutes
Without infrared for at least 60°C (140°F), at least 30 minutes
Without infrared for at least 20°C (68°F), at least 24 hours

If a complete build-up of paint is required in the visible area:

Tape off primed adhesive flange before applying top coat

IMPORTANT: Observe hardening time of BMW multibase filler otherwise a perfect bond cannot be guaranteed!