Smooth running control: Monitoring
WARNING: This page does not describe the selected car, but rather 45 other vehicles, including the 2016 BMW M5, 2016 BMW 550i xDrive, 2016 BMW 550i, 2016 BMW 535i xDrive, and 2016 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.
If the correction quantities are not reached or are exceeded, the following faults can be stored:
- Operational smoothness regulator, correction quantity too high/too low: The limit value for at least one cylinder was not reached or was exceeded.
- Operational smoothness regulator cylinder X, correction amount too high/too low: The limit value at the cylinder X was exceeded or fallen below, while the correction amounts to the other cylinders were OK.
The limit value is dependent on the fuel injection rate and is between ± 4.9 and ± 5.9 mm/stroke.