00...... Notes on Using Repair Instructions, Technical Data, Tightening Torques

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW Z4, 2007 BMW Z4, 2006 BMW Z4, 2005 BMW Z4, and 2004 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

These repair instructions are intended to help expertly carry out maintenance and repair work.

The Repair Instructions describes the removal, installation and replacement of subassemblies in the vehicle.

The Repair Instructions describe tasks which can be carried out on series-production vehicles and vehicles which have not been subsequently converted.

Cross-references to "Technical Data" and "Tightening Torques" must be complied with.

If there are no cross-references to tightening torques in the repair instructions, the excerpts from the MAINTENANCE AND GENERAL INFORMATION - TIGHTENING TORQUES must be observed.

Cross-references to other flat rate units are intended as an aid and can refer to a complete work operation or merely to individual work steps contained therein.

Cross-references to other flat rate units must not be considered as an extension of the labor performance standard.

In general, the individual work steps of the Repair Instructions describe only the removal of subassemblies. All removed subassemblies are reinstalled in reverse sequence.