Performing initialization

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Move side window to upper end position
Pull and hold switch in "Close one-touch function" (2nd switch position) during the entire process.

NOTE: Re-initialization was successful if toll function and anti-trap mechanism function flawlessly.

Alternatively, initialization of the power window regulation can also be carried out via the Service function in ISTA.

Selection via:

Body
- Locking and security functions
  - Power window regulator
    - Initialize power window regulators