Test Module Evaluation

Test Module Evaluation

Please enter the applicable items

Test module completed without part replacement
1 Combustion misfires due to fuel lack
2 Secondary faults: combustion misfire remedied by remedying another fault
3 No cause was found and the only measure was to delete the fault code memory in accordance with the instruction in the test module
4 No cause was found and as measure. Technical Support was contacted, in accordance with the instruction in the test module

Non-electrical causes at the engine
5 Engine mechanically defective
6 Exhaust system mechanically defective
7 Fuel system mechanically defective
8 Poor compression
9 Extraneous air
10 Variable intake system mechanically defective

Ignition coil
11 Ignition coil with visible damage
12 Ignition coil with non-visible damage, cause could be determined by cross-swapping
13 BREMI ignition coils were fitted

Spark plug
14 Spark plug with visible damage
15 Spark plug with non-visible damage, cause could be determined by cross-swapping or replacement

Fuel injector
16 Fuel injector with visible damage
17 Fuel injector with non-visible damage, cause could be determined by cross-swapping or replacing

Engine management system
18 DME replacement