Torque Specifications
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2007 BMW Z4, 2006 BMW Z4, 2005 BMW Z4, 2005 BMW 530i, and 2005 BMW 525i. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Clutch Slave Cylinder-To-Clutch Housing/Transmission Case | 16 (22) | |||
| Drain & Fill Plug | ||||
| S5SG | 37 (50) | |||
| GS6-53BZ/DZ GS6-37BZ/DZ M18x1.5 Hexagon Socket Thread | 26 (35) | |||
| GS6-53BZ/DZ GS6-37BZ/DZ M12x1.5 Thread | 18 (25) | |||
| Output Flange (1) | ||||
| Step 1 | 125 (170) | |||
| Step 2 | Release | |||
| Step 3 | 88 (120) | |||
| Pressure Sensor-To-Valve Block | 11 (15) | |||
| Pressure Accumulator-To-Valve Block | 22 (30) | |||
| Protective Plate/Valve Block-To-Transmission Housing | 15 (20) | |||
| Retaining Screw For Hydraulic Line | 13 (18) | |||
| Transmission Cross Member-To-Body | ||||
| M8 Thread | 15 (21) | |||
| M10 Thread | 31 (42) | |||
| Transmission Mounts (Rubber)-To-Body | 31 (42) | |||
| INCH Lbs. (N.m) | ||||
| Heat Shield-To-Expansion Tank/Pump Bracket | 53 (6) | |||
| Protective Plate/Expansion Tank/Shift Actuator/Bracket Pressure Accumulator/Hydraulic Pump/Valve Block-To-Transmission Housing | 88 (10) | |||
| Valves-To-Valve Block | 31 (3.5) | |||
|
||||