86 10 ... Replacing Rear Light

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Release thumb screws (1), slide light guard (2) in direction of middle of car and tilt out towards rear.

Fig 1: Sliding Light Guard

Courtesy of BMW OF NORTH AMERICA, INC.

Turn handwheel (1) counterclockwise in direction of arrow and remove base (2).

Fig 2: Turning Handwheel Counterclockwise

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (1) and press rear light (2) out towards front.

Installation:

Use new self-locking nuts.

Tightening Torque. Refer to TRAILERS - TIGHTENING TORQUES - ALPINA .

Fig 3: Identifying Rear Light

Courtesy of BMW OF NORTH AMERICA, INC.