Functions Changed After Vehicle Programming E90, E91
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2006 BMW 530i. However, it is still accessible from the selected car via links, so may be relevant.
After a vehicle has been programmed, the customer may notice changes in certain functions. Changes in function depend on the current vehicle data status and the new data status.
Procedure:
- Connect the vehicle to the BMW diagnosis system
- Read off the present vehicle data status as follows:
- Call up the "Progman" program.
- Select "Vehicle order" and confirm.
The current vehicle data status is displayed.
- Make a note of this data status.
- Locate the vehicle data status in the left-hand column of the table.
- Click on the hotspot on this line in the right-hand column.
- Print off the enclosure and attach to the job order.
If the target data status in the table does not correspond to the current Progman version in the workshop, you should still proceed as described above.
VEHICLE DATA STATUS E90, E91
| Vehicle data status | Target data status/Progman version |
|---|---|
| E89x-05-12-500 Progman V 20.0 | |
| E89x-05-09-520 | No change |
| E89x-05-06-510 | No change |
| E89x-05-03-520 | No change |
| E89x-05-03-510 | No change |
| E89x-05-03-506 | No change |
Customers should be informed of any changes in function. Let them keep the printout as an enclosure to the Owner's Handbook.