LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Specifications & Procedures) >> Riding Height Adjustment >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Riding Height Adjustment: Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW Z4, 2007 BMW Z4, 2006 BMW Z4, 2005 BMW Z4, and 2004 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: On vehicles with air springs, pull fuse of air supply system so there is no regulation.
NOTE: On vehicles with electronic chassis controls, all systems should be functional before attempting riding height or wheel alignment adjustment.

Before adjusting alignment, check riding height. Riding height must be checked with vehicle on level floor and tires properly inflated. Load front seats with 150 Lbs. (68 kg) each. Load 31 Lbs. (14 kg) in center of trunk and fill fuel tank.

Measure actual ride-level height from wheel housing lower edge to rim flange at height of wheel center. Determine average value of each wheel after lifting and lowering vehicle body and then average value of axle from these values. Ride height measurement must be within .04" (10 mm) of each side. For specifications, see RIDE HEIGHT SPECIFICATIONS .