32 00... Chassis/wheel alignment check procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
CHASSIS/WHEEL ALIGNMENT PROCEDURE CHART
| Check adherence to 32 00... Test conditions for chassis/wheel alignment check | ||||||
| I V |
||||||
| Position vehicle on measuring stand | ||||||
| I V |
||||||
| Measure vehicle ride height | OK -> | Carry out chassis/wheel alignment check with ride-height measurement without load, see 32 00 155 KDS chassis/wheel alignment check with ride-height measurement without load . | ||||
| Read off setpoint value in KDS Tolerance-20 / +40 mm per wheel permissible Difference between left / right max. 10 mm permissible |
||||||
| Not OK / no data I V |
||||||
| Move vehicle into normal position, see 32 00... Moving vehicle into normal position . | ||||||
| Introduce load and measure ride heights | ||||||
| Read off setpoint value in KDS Tolerance ± 10 mm per wheel permissible Difference between left / right max. 10 mm permissible |
Not OK -> | |||||
| OK I V |
Check suspension for damage, repair if necessary | |||||
| Move vehicle into design position, see 32 00... Moving vehicle into design position . | <- Not OK | |||||
| Add/distribute weights and measure ride heights | ||||||
| Read off setpoint value in KDS Tolerance ± 2 mm per wheel permissible Difference between left / right max. 2 mm permissible |
||||||
| I V |
||||||
| Carry out chassis/wheel alignment check with load up to design position, see 32 00 155 KDS chassis/wheel alignment check with ride-height measurement without load . | ||||||