86 10 ... Replacing Holder For Chock

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Pull bar (1) down in direction of arrow A. Pull out chock (2) in direction of arrow B at an angle towards bottom.

Fig 1: Pulling Out Chock

Courtesy of BMW OF NORTH AMERICA, INC.

Release and unscrew cheese head tapping screws (1) on holder (2).

Fig 2: Identifying Cheese Head Tapping Screws On Holder

Courtesy of BMW OF NORTH AMERICA, INC.