86 21 ... Removing Plug For Inside Light

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Two different types of plugs are used for the inside light. Both types function in the same way, only their designs are different.

Type 1:

Release screw (1) and separate housing plug (2).

Fig 1: Identifying Housing Plug

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and disconnect cables (2) from screw clamp.

Fig 2: Identifying Cables

Courtesy of BMW OF NORTH AMERICA, INC.

Type 2:

Release screw (1) and separate housing plug (2).

Fig 3: Identifying Housing Plug

Courtesy of BMW OF NORTH AMERICA, INC.

Remove contact parts (1+2).

Installation:

When installing, make sure contact parts (1+2) are in correct installation position.

Fig 4: Identifying Contact Parts

Courtesy of BMW OF NORTH AMERICA, INC.