86 21 ... Replacing Inside Light

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Unclip cover (1) at side recess (arrowed) and remove towards bottom.

Fig 1: Uncliping Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip lamp housing (1) at side recess (arrowed).

Fig 2: Uncliping Lamp Housing

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect flat connector (1) from flat connector contact.

Fig 3: Identifying Flat Connector

Courtesy of BMW OF NORTH AMERICA, INC.

CAUTION: Before drilling out rivets, drive in rivet pins with a punch.
Drill out rivets (1). Pull off inside light mounting bracket (2) over flat connector (3).

Fig 4: Identifying Rivets, Inside Light Mounting Bracket And Flat Connector

Courtesy of BMW OF NORTH AMERICA, INC.