86 21... Removing lock barrel
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2013 BMW 135i, 2013 BMW 128i, 2012 BMW 135i, 2012 BMW 128i, and 2011 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The following text describes how to remove the lock barrel on the rear lid as an example.
Proceed in the same way for the side lids. Remove the lock barrel while the lid is open.
Remove cover, spring nut and pull rod,
refer to 86 21... REMOVING ROTARY STRIKER LOCK .
Proceed in the same way for the side lids. Remove the lock barrel while the lid is open.
Remove cover, spring nut and pull rod,
refer to 86 21... REMOVING ROTARY STRIKER LOCK .
Slide retainer (1) in direction of arrow away from lock barrel (2). Remove lock barrel (2).
Installation:
Examine rubber backing for damage and replace if necessary. When replacing lock barrel, make sure coding of new lock barrel matches coding of fitted lock barrel (simultaneous closing).