86 21... Removing Lid
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Adjusting side lid to fit, refer to ADJUSTING SIDE LID TO FIT .
Adjusting rear lid to fit, refer to ADJUSTING REAR LID TO FIT .
NOTE:
The text describes how to remove the lid at one rear lid mounting point as an example. Proceed in the same way for the side lids. Spare part lids are always supplied without complete locking systems.
Two persons are required for this task.
NOTE:
Open lid.
Loosen screws (1). Remove lid (2).
Installation:
Rear lid: shoulder (3) points to middle of hood.
Side lid: shoulder (3) points to outside of hood.
Tightening Torque: Refer to 86 21 7AZ . See HOOD for specs.